A well-matched 22 kW system for Neave Industrial combines the compressor with the correct receiver, dryer, filtration and pipe connection for the intended food processing duty.
Typical planning role: a continuous line with multiple pneumatic consumers.
The Neave Industrial specification should connect the compressor room to the production requirement. Where product handling, packaging, cleaning support and pneumatic automation is involved, receiver size, filtration and pressure drop deserve equal attention. This detail is confirmed during the 22 kW site-planning stage for Neave Industrial.
One realistic design case for this page is a central air point serving product handling, packaging, cleaning support and pneumatic automation across more than one work area. The 22 kW unit supplies about 3.6 m³/min at a typical 7 bar reference point, but the decision must be checked at the site’s actual pressure and simultaneous demand. For Neave Industrial, the 22 kW recommendation records this item in the equipment and installation schedule.
For food processing in Neave Industrial, list the equipment behind product handling, packaging, cleaning support and pneumatic automation and separate steady consumers from short peaks. This determines whether 22 kW is a base-load match or only one part of the final system.
The package should address air quality, condensate management and filtration selected for the point of use. A matched dryer and filter train must meet the most sensitive food processing application without adding unnecessary pressure loss. This detail is confirmed during the 22 kW site-planning stage for Neave Industrial.
Where engineering demand changes through the shift, VSD may reduce unloaded operation. Where demand is stable, fixed-speed can remain the better-value option. The choice should follow a demand profile, not a general rule. The 22 kW design for Neave Industrial is checked against this requirement before compressor, receiver and dryer selections are finalised.
Within the Neave Industrial proposal, those conditions are reflected in the supporting equipment selected around the 22 kW compressor.
For this 22 kW page, the strongest proposal is one that links receiver storage, room ventilation, filtration and maintenance access to the food processing process instead of treating them as optional extras. In the Neave Industrial quotation, this is matched to the actual operating pattern of the proposed 22 kW system.
| Sector | Likely compressed-air uses | Specification priority |
|---|---|---|
| Food Processing | product handling, packaging, cleaning support and pneumatic automation | air quality, condensate management and filtration selected for the point of use |
| Engineering | fabrication tools, CNC support, cleaning, assembly and spray applications | peak-demand storage, moisture control and an efficient distribution layout |
| Food Processing | product handling, packaging, cleaning support and pneumatic automation | air quality, condensate management and filtration selected for the point of use |
Supply the compressor for connection to a suitable existing receiver, dryer and distribution system in Neave Industrial. Existing equipment should be checked for capacity and pressure loss first. This forms part of the technical review for the 22 kW Neave Industrial quotation rather than being treated as a standard assumption.
Combine the 22 kW machine with a reviewed 1 000 L receiver range, refrigeration dryer, pre-filter, coalescing filter and automatic drains for the food processing duty. In the Neave Industrial quotation, this is matched to the actual operating pattern of the proposed 22 kW system.
Allow connection points, controls and pipe capacity for future engineering demand. Where air loss stops production, evaluate standby capacity or an emergency compressor connection. This forms part of the technical review for the 22 kW Neave Industrial quotation rather than being treated as a standard assumption.
Motor size alone does not confirm suitability. Compare usable flow at pressure, duty cycle and air quality for each option. On the Neave Industrial project, we confirm this specifically for the 22 kW package and the measured duty profile.
Most production systems benefit from a matched refrigeration dryer and filtration. The required dew point and filter grade depend on the food processing process; sensitive instruments or product-contact risks may require a different air-quality design. In the Neave Industrial quotation, this is matched to the actual operating pattern of the proposed 22 kW system.
Specify the minimum pressure required at the furthest user, then calculate losses through pipework, filters and the dryer. Raising the compressor set point to compensate for a restrictive network wastes energy, so the distribution system should be checked first. The 22 kW design for Neave Industrial is checked against this requirement before compressor, receiver and dryer selections are finalised.
The scope can include delivery, off-loading, positioning, receiver and dryer connections, airline tie-in, electrical coordination, commissioning and operator handover. The final quotation separates included work from any site preparation required before arrival. On the Neave Industrial project, we confirm this specifically for the 22 kW package and the measured duty profile.
Base the service plan on operating hours, environment and manufacturer intervals. For an agro-processing and mixed-industrial environment, intake filters, cooler cleanliness, drains and ventilation deserve routine inspection in addition to oil, separator and filter changes. On the Neave Industrial project, we confirm this specifically for the 22 kW package and the measured duty profile.
At a Neave Industrial site, reliability depends on the compressor, cooling, storage, treatment and distribution working together. For a 22 kW unit, operating trends and critical-spares planning become increasingly important.
Oil, filters, separator, drive, cooling, drains and controls are scoped from the exact machine.
Alarms, pressure, temperature, current and behaviour help separate component, demand, ventilation and pipework faults in Neave Industrial.
Planned visits, reporting, open actions and critical-spares planning can be aligned to the food processing duty.
Air treatment, drains, storage, leaks and point-of-use pressure can be included where they affect the problem.
Yes. Send the model, serial, hours, service history and exact Neave Industrial site details so travel, parts and shutdown needs can be quoted.
Send the alarm, operating symptom, available pressure and temperature, nameplate and controller photos, site contact, access details and production impact in Neave Industrial.
Coverage note: service availability, travel and response are confirmed for the exact site. This page describes coverage and does not represent a separate staffed branch in Neave Industrial.
Send the air users, pressure, hours, electrical supply, existing equipment and delivery position. We will respond with a defined compressor, receiver, dryer, filtration and installation scope. The Neave Industrial system brief links this requirement to the control and air-treatment plan for the 22 kW machine.
Request a Detailed QuoteCall Sales