A 22 kW screw compressor is commonly shortlisted when a Clairwood operation needs dependable air for vehicle workshops, loading equipment, maintenance bays and packaging support, but final sizing still needs a measured demand check.
Typical planning role: a continuous line with multiple pneumatic consumers.
For the type of logistics and food processing work associated with this Clairwood page, the design emphasis is fast recovery, practical pipe routing and dependable service access. Those items have a direct effect on reliability and operating cost. This is one of the checks used to distinguish the 22 kW Clairwood package from a generic equipment-only quote.
One realistic design case for this page is a replacement project where the existing system is short of pressure during logistics peaks. The 22 kW unit supplies about 3.6 m³/min at a typical 7 bar reference point, but the decision must be checked at the site’s actual pressure and simultaneous demand. This is one of the checks used to distinguish the 22 kW Clairwood package from a generic equipment-only quote.
For logistics in Clairwood, list the equipment behind vehicle workshops, loading equipment, maintenance bays and packaging support and separate steady consumers from short peaks. This determines whether 22 kW is a base-load match or only one part of the final system.
The package should address fast recovery, practical pipe routing and dependable service access. A matched dryer and filter train must meet the most sensitive logistics application without adding unnecessary pressure loss. The final 22 kW proposal for Clairwood will show whether this is included, optional or dependent on site preparation.
Where food processing demand changes through the shift, VSD may reduce unloaded operation. Where demand is stable, fixed-speed can remain the better-value option. The choice should follow a demand profile, not a general rule. This detail is confirmed during the 22 kW site-planning stage for Clairwood.
For this 22 kW Clairwood brief, the same operating priorities are converted into practical equipment and installation choices.
For this 22 kW page, the strongest proposal is one that links receiver storage, room ventilation, filtration and maintenance access to the logistics process instead of treating them as optional extras. On the Clairwood project, we confirm this specifically for the 22 kW package and the measured duty profile.
| Sector | Likely compressed-air uses | Specification priority |
|---|---|---|
| Logistics | vehicle workshops, loading equipment, maintenance bays and packaging support | fast recovery, practical pipe routing and dependable service access |
| Food Processing | product handling, packaging, cleaning support and pneumatic automation | air quality, condensate management and filtration selected for the point of use |
| Manufacturing | pneumatic tools, actuators, fixtures, cleaning and machine automation | measured demand, pressure-drop control and room for production growth |
Supply the compressor for connection to a suitable existing receiver, dryer and distribution system in Clairwood. Existing equipment should be checked for capacity and pressure loss first. Before order placement, this point is reviewed for the specific 22 kW installation in Clairwood.
Combine the 22 kW machine with a reviewed 1 000 L receiver range, refrigeration dryer, pre-filter, coalescing filter and automatic drains for the logistics duty. For the 22 kW Clairwood proposal, this point is verified against the submitted site data before the final scope is issued.
Allow connection points, controls and pipe capacity for future food processing demand. Where air loss stops production, evaluate standby capacity or an emergency compressor connection. The final 22 kW proposal for Clairwood will show whether this is included, optional or dependent on site preparation.
Motor size alone does not confirm suitability. Compare usable flow at pressure, duty cycle and air quality for each option. This detail is confirmed during the 22 kW site-planning stage for Clairwood.
Send the required pressure, list of air users, operating hours, electrical supply, existing receiver or dryer details, air-quality requirement and delivery address. Photos of the intended compressor position and current pipe connection also improve the accuracy of the proposal. On the Clairwood project, we confirm this specifically for the 22 kW package and the measured duty profile.
Start with the most sensitive point of use, then choose dryer performance and filter grades from that requirement. The design should also provide accessible condensate drains and avoid creating unnecessary pressure drop through over-restrictive filtration. This forms part of the technical review for the 22 kW Clairwood quotation rather than being treated as a standard assumption.
Yes. We can quote the equipment, delivery and agreed commissioning scope for Clairwood, with ongoing access to service parts, oils, filters and separator elements. Cross-border projects are quoted with the required logistics and documentation clearly defined. For the 22 kW Clairwood proposal, this point is verified against the submitted site data before the final scope is issued.
List every air user that can run together, its required pressure and the operating hours. The 22 kW model is rated at about 3.6 m³/min at a typical 7 bar point, but the final choice must allow for pressure, leakage, dryer loss and sensible growth margin for the logistics duty. On the Clairwood project, we confirm this specifically for the 22 kW package and the measured duty profile.
The service strategy for Clairwood should combine scheduled work with early warning checks for the logistics operation. For a 22 kW unit, operating trends and critical-spares planning become increasingly important.
Oil, filters, separator, drive, cooling, drains and controls are scoped from the exact machine.
Alarms, pressure, temperature, current and behaviour help separate component, demand, ventilation and pipework faults in Clairwood.
Planned visits, reporting, open actions and critical-spares planning can be aligned to the logistics duty.
Air treatment, drains, storage, leaks and point-of-use pressure can be included where they affect the problem.
Yes. Send the model, serial, hours, service history and exact Clairwood site details so travel, parts and shutdown needs can be quoted.
Send the alarm, operating symptom, available pressure and temperature, nameplate and controller photos, site contact, access details and production impact in Clairwood.
Coverage note: service availability, travel and response are confirmed for the exact site. This page describes coverage and does not represent a separate staffed branch in Clairwood.
Send the air users, pressure, hours, electrical supply, existing equipment and delivery position. We will respond with a defined compressor, receiver, dryer, filtration and installation scope. This forms part of the technical review for the 22 kW Clairwood quotation rather than being treated as a standard assumption.
Request a Detailed QuoteCall Sales