Before pricing an 18.5 kW machine for Lobatse, the system should be mapped from the furthest point of use back to the compressor room to expose pressure loss and storage needs.
Typical planning role: a multi-user production line or process-support duty.
The Lobatse specification should connect the compressor room to the production requirement. Where product handling, packaging, cleaning support and pneumatic automation is involved, receiver size, filtration and pressure drop deserve equal attention. On the Lobatse project, we confirm this specifically for the 18.5 kW package and the measured duty profile.
One realistic design case for this page is a growing plant where food processing demand is steady but future beef processing equipment is planned. The 18.5 kW unit supplies about 3.0 m³/min at a typical 7 bar reference point, but the decision must be checked at the site’s actual pressure and simultaneous demand.
For food processing in Lobatse, list the equipment behind product handling, packaging, cleaning support and pneumatic automation and separate steady consumers from short peaks. This determines whether 18.5 kW is a base-load match or only one part of the final system.
The package should address air quality, condensate management and filtration selected for the point of use. A matched dryer and filter train must meet the most sensitive food processing application without adding unnecessary pressure loss. The Lobatse system brief links this requirement to the control and air-treatment plan for the 18.5 kW machine.
Where beef processing demand changes through the shift, VSD may reduce unloaded operation. Where demand is stable, fixed-speed can remain the better-value option. The choice should follow a demand profile, not a general rule. For the Lobatse application, the 18.5 kW scope states how this requirement will be handled.
For this 18.5 kW Lobatse brief, the same operating priorities are converted into practical equipment and installation choices.
For this 18.5 kW page, the strongest proposal is one that links receiver storage, room ventilation, filtration and maintenance access to the food processing process instead of treating them as optional extras. The Lobatse system brief links this requirement to the control and air-treatment plan for the 18.5 kW machine.
| Sector | Likely compressed-air uses | Specification priority |
|---|---|---|
| Food Processing | product handling, packaging, cleaning support and pneumatic automation | air quality, condensate management and filtration selected for the point of use |
| Beef Processing | pneumatic equipment, cleaning, tooling and production support | measured demand, moisture control, service access and pressure stability |
| Beef Processing | pneumatic equipment, cleaning, tooling and production support | measured demand, moisture control, service access and pressure stability |
Supply the compressor for connection to a suitable existing receiver, dryer and distribution system in Lobatse. Existing equipment should be checked for capacity and pressure loss first. This forms part of the technical review for the 18.5 kW Lobatse quotation rather than being treated as a standard assumption.
Combine the 18.5 kW machine with a reviewed 500–1 000 L receiver range, refrigeration dryer, pre-filter, coalescing filter and automatic drains for the food processing duty. In the Lobatse quotation, this is matched to the actual operating pattern of the proposed 18.5 kW system.
Allow connection points, controls and pipe capacity for future beef processing demand. Where air loss stops production, evaluate standby capacity or an emergency compressor connection. The final 18.5 kW proposal for Lobatse will show whether this is included, optional or dependent on site preparation.
Motor size alone does not confirm suitability. Compare usable flow at pressure, duty cycle and air quality for each option. The Lobatse system brief links this requirement to the control and air-treatment plan for the 18.5 kW machine.
Base the service plan on operating hours, environment and manufacturer intervals. For an agro-processing and mixed-industrial environment, intake filters, cooler cleanliness, drains and ventilation deserve routine inspection in addition to oil, separator and filter changes. The 18.5 kW design for Lobatse is checked against this requirement before compressor, receiver and dryer selections are finalised.
If loss of air stops the food processing process, compare the cost of downtime with a duty/standby arrangement or an emergency connection point. Redundancy can sometimes be phased in, but the pipework and controls should allow for it from the start. On the Lobatse project, we confirm this specifically for the 18.5 kW package and the measured duty profile.
Include known equipment additions and a measured margin, but avoid buying excessive unused capacity. A larger receiver, leak reduction and a VSD/base-load combination may handle growth more efficiently than simply moving to the next motor size. On the Lobatse project, we confirm this specifically for the 18.5 kW package and the measured duty profile.
Send the required pressure, list of air users, operating hours, electrical supply, existing receiver or dryer details, air-quality requirement and delivery address. Photos of the intended compressor position and current pipe connection also improve the accuracy of the proposal. For the 18.5 kW Lobatse proposal, this point is verified against the submitted site data before the final scope is issued.
For equipment in Lobatse, Botswana, first determine whether the need is routine maintenance, diagnosis, repair or overhaul. For an 18.5 kW unit, coordinate filters, oil, separator, drive, cooling, valves and electrical condition.
Oil, filters, separator, drive, cooling, drains and controls are scoped from the exact machine.
Alarms, pressure, temperature, current and behaviour help separate component, demand, ventilation and pipework faults in Lobatse, Botswana.
Planned visits, reporting, open actions and critical-spares planning can be aligned to the food processing duty.
Air treatment, drains, storage, leaks and point-of-use pressure can be included where they affect the problem.
Yes. Send the model, serial, hours, service history and exact Lobatse, Botswana site details so travel, parts and shutdown needs can be quoted.
Send the alarm, operating symptom, available pressure and temperature, nameplate and controller photos, site contact, access details and production impact in Lobatse, Botswana.
Coverage note: service availability, travel and response are confirmed for the exact site. This page describes coverage and does not represent a separate staffed branch in Lobatse, Botswana.
Send the air users, pressure, hours, electrical supply, existing equipment and delivery position. We will respond with a defined compressor, receiver, dryer, filtration and installation scope. On the Lobatse project, we confirm this specifically for the 18.5 kW package and the measured duty profile.
Request a Detailed QuoteCall Sales