Before pricing a 22 kW machine for Walvis Bay, the system should be mapped from the furthest point of use back to the compressor room to expose pressure loss and storage needs.
Typical planning role: a continuous line with multiple pneumatic consumers.
For the type of food processing and port logistics work associated with this Walvis Bay page, the design emphasis is air quality, condensate management and filtration selected for the point of use. Those items have a direct effect on reliability and operating cost. This forms part of the technical review for the 22 kW Walvis Bay quotation rather than being treated as a standard assumption.
One realistic design case for this page is a central air point serving product handling, packaging, cleaning support and pneumatic automation across more than one work area. The 22 kW unit supplies about 3.6 m³/min at a typical 7 bar reference point, but the decision must be checked at the site’s actual pressure and simultaneous demand. In the Walvis Bay quotation, this is matched to the actual operating pattern of the proposed 22 kW system.
For food processing in Walvis Bay, list the equipment behind product handling, packaging, cleaning support and pneumatic automation and separate steady consumers from short peaks. This determines whether 22 kW is a base-load match or only one part of the final system.
The package should address air quality, condensate management and filtration selected for the point of use. A matched dryer and filter train must meet the most sensitive food processing application without adding unnecessary pressure loss. The 22 kW design for Walvis Bay is checked against this requirement before compressor, receiver and dryer selections are finalised.
Where port logistics demand changes through the shift, VSD may reduce unloaded operation. Where demand is stable, fixed-speed can remain the better-value option. The choice should follow a demand profile, not a general rule. This forms part of the technical review for the 22 kW Walvis Bay quotation rather than being treated as a standard assumption.
Within the Walvis Bay proposal, those conditions are reflected in the supporting equipment selected around the 22 kW compressor.
For this 22 kW page, the strongest proposal is one that links receiver storage, room ventilation, filtration and maintenance access to the food processing process instead of treating them as optional extras. The 22 kW design for Walvis Bay is checked against this requirement before compressor, receiver and dryer selections are finalised.
| Sector | Likely compressed-air uses | Specification priority |
|---|---|---|
| Food Processing | product handling, packaging, cleaning support and pneumatic automation | air quality, condensate management and filtration selected for the point of use |
| Port Logistics | vehicle workshops, loading equipment, maintenance bays and packaging support | fast recovery, practical pipe routing and dependable service access |
| Mining | maintenance workshops, pneumatic controls, cleaning and plant-support duties | dust control, filtration access, rugged installation and service readiness |
Supply the compressor for connection to a suitable existing receiver, dryer and distribution system in Walvis Bay. Existing equipment should be checked for capacity and pressure loss first. For the Walvis Bay application, the 22 kW scope states how this requirement will be handled.
Combine the 22 kW machine with a reviewed 1 000 L receiver range, refrigeration dryer, pre-filter, coalescing filter and automatic drains for the food processing duty. This forms part of the technical review for the 22 kW Walvis Bay quotation rather than being treated as a standard assumption.
Allow connection points, controls and pipe capacity for future port logistics demand. Where air loss stops production, evaluate standby capacity or an emergency compressor connection. The final 22 kW proposal for Walvis Bay will show whether this is included, optional or dependent on site preparation.
Motor size alone does not confirm suitability. Compare usable flow at pressure, duty cycle and air quality for each option. This is one of the checks used to distinguish the 22 kW Walvis Bay package from a generic equipment-only quote.
1 000 L is a practical starting range, but the receiver must be checked against demand peaks, control method and available space. Short events linked to product handling, packaging, cleaning support and pneumatic automation may justify more storage instead of oversizing the compressor. The Walvis Bay system brief links this requirement to the control and air-treatment plan for the 22 kW machine.
Most production systems benefit from a matched refrigeration dryer and filtration. The required dew point and filter grade depend on the food processing process; sensitive instruments or product-contact risks may require a different air-quality design. Before order placement, this point is reviewed for the specific 22 kW installation in Walvis Bay.
Specify the minimum pressure required at the furthest user, then calculate losses through pipework, filters and the dryer. Raising the compressor set point to compensate for a restrictive network wastes energy, so the distribution system should be checked first. On the Walvis Bay project, we confirm this specifically for the 22 kW package and the measured duty profile.
The scope can include delivery, off-loading, positioning, receiver and dryer connections, airline tie-in, electrical coordination, commissioning and operator handover. The final quotation separates included work from any site preparation required before arrival. For the Walvis Bay application, the 22 kW scope states how this requirement will be handled.
A service plan for Walvis Bay, Namibia starts with hours, environment and the production consequence of the food processing process. For a 22 kW unit, operating trends and critical-spares planning become increasingly important.
Oil, filters, separator, drive, cooling, drains and controls are scoped from the exact machine.
Alarms, pressure, temperature, current and behaviour help separate component, demand, ventilation and pipework faults in Walvis Bay, Namibia.
Planned visits, reporting, open actions and critical-spares planning can be aligned to the food processing duty.
Air treatment, drains, storage, leaks and point-of-use pressure can be included where they affect the problem.
Yes. Send the model, serial, hours, service history and exact Walvis Bay, Namibia site details so travel, parts and shutdown needs can be quoted.
Send the alarm, operating symptom, available pressure and temperature, nameplate and controller photos, site contact, access details and production impact in Walvis Bay, Namibia.
Coverage note: service availability, travel and response are confirmed for the exact site. This page describes coverage and does not represent a separate staffed branch in Walvis Bay, Namibia.
Send the air users, pressure, hours, electrical supply, existing equipment and delivery position. We will respond with a defined compressor, receiver, dryer, filtration and installation scope. This is one of the checks used to distinguish the 22 kW Walvis Bay package from a generic equipment-only quote.
Request a Detailed QuoteCall Sales