The starting point for specifying a 22 kW unit in Atlantis is the actual air profile: which equipment runs together, at what pressure, and for how many hours per shift.
Typical planning role: a continuous line with multiple pneumatic consumers.
The useful local question is not whether a compressor can be delivered to Atlantis; it is whether the package is arranged for the site’s automotive components workload, maintenance access and expected production hours. This detail is confirmed during the 22 kW site-planning stage for Atlantis.
One realistic design case for this page is a electronics department with several users cycling through the shift. The 22 kW unit supplies about 3.6 m³/min at a typical 7 bar reference point, but the decision must be checked at the site’s actual pressure and simultaneous demand.
For automotive components in Atlantis, list the equipment behind assembly tools, component cleaning, spray preparation and tyre or workshop equipment and separate steady consumers from short peaks. This determines whether 22 kW is a base-load match or only one part of the final system.
The package should address stable pressure, clean air and enough storage for short high-demand events. A matched dryer and filter train must meet the most sensitive automotive components application without adding unnecessary pressure loss. For the 22 kW Atlantis proposal, this point is verified against the submitted site data before the final scope is issued.
Where electronics demand changes through the shift, VSD may reduce unloaded operation. Where demand is stable, fixed-speed can remain the better-value option. The choice should follow a demand profile, not a general rule. The 22 kW design for Atlantis is checked against this requirement before compressor, receiver and dryer selections are finalised.
That local profile guides the complete 22 kW system arrangement proposed for Atlantis, not merely the compressor model.
For this 22 kW page, the strongest proposal is one that links receiver storage, room ventilation, filtration and maintenance access to the automotive components process instead of treating them as optional extras.
| Sector | Likely compressed-air uses | Specification priority |
|---|---|---|
| Automotive Components | assembly tools, component cleaning, spray preparation and tyre or workshop equipment | stable pressure, clean air and enough storage for short high-demand events |
| Electronics | pneumatic equipment, cleaning, tooling and production support | measured demand, moisture control, service access and pressure stability |
| Manufacturing | pneumatic tools, actuators, fixtures, cleaning and machine automation | measured demand, pressure-drop control and room for production growth |
Supply the compressor for connection to a suitable existing receiver, dryer and distribution system in Atlantis. Existing equipment should be checked for capacity and pressure loss first. This forms part of the technical review for the 22 kW Atlantis quotation rather than being treated as a standard assumption.
Combine the 22 kW machine with a reviewed 1 000 L receiver range, refrigeration dryer, pre-filter, coalescing filter and automatic drains for the automotive components duty.
Allow connection points, controls and pipe capacity for future electronics demand. Where air loss stops production, evaluate standby capacity or an emergency compressor connection. The Atlantis system brief links this requirement to the control and air-treatment plan for the 22 kW machine.
Motor size alone does not confirm suitability. Compare usable flow at pressure, duty cycle and air quality for each option. Before order placement, this point is reviewed for the specific 22 kW installation in Atlantis.
Include known equipment additions and a measured margin, but avoid buying excessive unused capacity. A larger receiver, leak reduction and a VSD/base-load combination may handle growth more efficiently than simply moving to the next motor size. In the Atlantis quotation, this is matched to the actual operating pattern of the proposed 22 kW system.
Send the required pressure, list of air users, operating hours, electrical supply, existing receiver or dryer details, air-quality requirement and delivery address. Photos of the intended compressor position and current pipe connection also improve the accuracy of the proposal. On the Atlantis project, we confirm this specifically for the 22 kW package and the measured duty profile.
Start with the most sensitive point of use, then choose dryer performance and filter grades from that requirement. The design should also provide accessible condensate drains and avoid creating unnecessary pressure drop through over-restrictive filtration. This detail is confirmed during the 22 kW site-planning stage for Atlantis.
Yes. We can quote the equipment, delivery and agreed commissioning scope for Atlantis, with ongoing access to service parts, oils, filters and separator elements. Cross-border projects are quoted with the required logistics and documentation clearly defined. On the Atlantis project, we confirm this specifically for the 22 kW package and the measured duty profile.
For Atlantis, maintenance should reflect the automotive components duty rather than a generic interval. For a 22 kW unit, operating trends and critical-spares planning become increasingly important.
Oil, filters, separator, drive, cooling, drains and controls are scoped from the exact machine.
Alarms, pressure, temperature, current and behaviour help separate component, demand, ventilation and pipework faults in Atlantis.
Planned visits, reporting, open actions and critical-spares planning can be aligned to the automotive components duty.
Air treatment, drains, storage, leaks and point-of-use pressure can be included where they affect the problem.
Yes. Send the model, serial, hours, service history and exact Atlantis site details so travel, parts and shutdown needs can be quoted.
Send the alarm, operating symptom, available pressure and temperature, nameplate and controller photos, site contact, access details and production impact in Atlantis.
Coverage note: service availability, travel and response are confirmed for the exact site. This page describes coverage and does not represent a separate staffed branch in Atlantis.
Send the air users, pressure, hours, electrical supply, existing equipment and delivery position. We will respond with a defined compressor, receiver, dryer, filtration and installation scope. The final 22 kW proposal for Atlantis will show whether this is included, optional or dependent on site preparation.
Request a Detailed QuoteCall Sales