For a growing Lobito operation, an 18.5 kW unit may provide the right step up in capacity when current air supply is limiting oil and gas production or workshop activity.
Typical planning role: a multi-user production line or process-support duty.
The useful local question is not whether a compressor can be delivered to Lobito; it is whether the package is arranged for the site’s oil and gas workload, maintenance access and expected production hours. For the Lobito application, the 18.5 kW scope states how this requirement will be handled.
One realistic design case for this page is a manufacturing department with several users cycling through the shift. The 18.5 kW unit supplies about 3.0 m³/min at a typical 7 bar reference point, but the decision must be checked at the site’s actual pressure and simultaneous demand. Before order placement, this point is reviewed for the specific 18.5 kW installation in Lobito.
For oil and gas in Lobito, list the equipment behind maintenance, instrumentation support, valve control and workshop duties and separate steady consumers from short peaks. This determines whether 18.5 kW is a base-load match or only one part of the final system.
The package should address air quality, documentation, safety review and reliable pressure. A matched dryer and filter train must meet the most sensitive oil and gas application without adding unnecessary pressure loss. This detail is confirmed during the 18.5 kW site-planning stage for Lobito.
Where manufacturing demand changes through the shift, VSD may reduce unloaded operation. Where demand is stable, fixed-speed can remain the better-value option. The choice should follow a demand profile, not a general rule. In the Lobito quotation, this is matched to the actual operating pattern of the proposed 18.5 kW system.
For this 18.5 kW Lobito brief, the same operating priorities are converted into practical equipment and installation choices.
For this 18.5 kW page, the strongest proposal is one that links receiver storage, room ventilation, filtration and maintenance access to the oil and gas process instead of treating them as optional extras.
| Sector | Likely compressed-air uses | Specification priority |
|---|---|---|
| Oil And Gas | maintenance, instrumentation support, valve control and workshop duties | air quality, documentation, safety review and reliable pressure |
| Manufacturing | pneumatic tools, actuators, fixtures, cleaning and machine automation | measured demand, pressure-drop control and room for production growth |
| Steel | pneumatic equipment, cleaning, tooling and production support | measured demand, moisture control, service access and pressure stability |
Supply the compressor for connection to a suitable existing receiver, dryer and distribution system in Lobito. Existing equipment should be checked for capacity and pressure loss first. This forms part of the technical review for the 18.5 kW Lobito quotation rather than being treated as a standard assumption.
Combine the 18.5 kW machine with a reviewed 500–1 000 L receiver range, refrigeration dryer, pre-filter, coalescing filter and automatic drains for the oil and gas duty.
Allow connection points, controls and pipe capacity for future manufacturing demand. Where air loss stops production, evaluate standby capacity or an emergency compressor connection. This is one of the checks used to distinguish the 18.5 kW Lobito package from a generic equipment-only quote.
Motor size alone does not confirm suitability. Compare usable flow at pressure, duty cycle and air quality for each option. This is one of the checks used to distinguish the 18.5 kW Lobito package from a generic equipment-only quote.
Send the required pressure, list of air users, operating hours, electrical supply, existing receiver or dryer details, air-quality requirement and delivery address. Photos of the intended compressor position and current pipe connection also improve the accuracy of the proposal. The 18.5 kW design for Lobito is checked against this requirement before compressor, receiver and dryer selections are finalised.
Start with the most sensitive point of use, then choose dryer performance and filter grades from that requirement. The design should also provide accessible condensate drains and avoid creating unnecessary pressure drop through over-restrictive filtration. On the Lobito project, we confirm this specifically for the 18.5 kW package and the measured duty profile.
Yes. We can quote the equipment, delivery and agreed commissioning scope for Lobito, with ongoing access to service parts, oils, filters and separator elements. Cross-border projects are quoted with the required logistics and documentation clearly defined. On the Lobito project, we confirm this specifically for the 18.5 kW package and the measured duty profile.
List every air user that can run together, its required pressure and the operating hours. The 18.5 kW model is rated at about 3.0 m³/min at a typical 7 bar point, but the final choice must allow for pressure, leakage, dryer loss and sensible growth margin for the oil and gas duty.
For equipment in Lobito, Angola, first determine whether the need is routine maintenance, diagnosis, repair or overhaul. For an 18.5 kW unit, coordinate filters, oil, separator, drive, cooling, valves and electrical condition.
Oil, filters, separator, drive, cooling, drains and controls are scoped from the exact machine.
Alarms, pressure, temperature, current and behaviour help separate component, demand, ventilation and pipework faults in Lobito, Angola.
Planned visits, reporting, open actions and critical-spares planning can be aligned to the oil and gas duty.
Air treatment, drains, storage, leaks and point-of-use pressure can be included where they affect the problem.
Yes. Send the model, serial, hours, service history and exact Lobito, Angola site details so travel, parts and shutdown needs can be quoted.
Send the alarm, operating symptom, available pressure and temperature, nameplate and controller photos, site contact, access details and production impact in Lobito, Angola.
Coverage note: service availability, travel and response are confirmed for the exact site. This page describes coverage and does not represent a separate staffed branch in Lobito, Angola.
Send the air users, pressure, hours, electrical supply, existing equipment and delivery position. We will respond with a defined compressor, receiver, dryer, filtration and installation scope. This detail is confirmed during the 18.5 kW site-planning stage for Lobito.
Request a Detailed QuoteCall Sales