For a growing Lobito operation, a 75 kW unit may provide the right step up in capacity when current air supply is limiting oil and gas production or workshop activity.
Typical planning role: a plant-wide air station or large process-air network.
For the type of oil and gas and steel work associated with this Lobito page, the design emphasis is air quality, documentation, safety review and reliable pressure. Those items have a direct effect on reliability and operating cost. This forms part of the technical review for the 75 kW Lobito quotation rather than being treated as a standard assumption.
One realistic design case for this page is a mixed base load from oil and gas equipment and short peaks from pneumatic equipment, cleaning, tooling and production support. The 75 kW unit supplies about 13 m³/min at a typical 7 bar reference point, but the decision must be checked at the site’s actual pressure and simultaneous demand.
For oil and gas in Lobito, list the equipment behind maintenance, instrumentation support, valve control and workshop duties and separate steady consumers from short peaks. This determines whether 75 kW is a base-load match or only one part of the final system.
The package should address air quality, documentation, safety review and reliable pressure. A matched dryer and filter train must meet the most sensitive oil and gas application without adding unnecessary pressure loss. For Lobito, the 75 kW recommendation records this item in the equipment and installation schedule.
Where steel demand changes through the shift, VSD may reduce unloaded operation. Where demand is stable, fixed-speed can remain the better-value option. The choice should follow a demand profile, not a general rule. This detail is confirmed during the 75 kW site-planning stage for Lobito.
Within the Lobito proposal, those conditions are reflected in the supporting equipment selected around the 75 kW compressor.
For this 75 kW page, the strongest proposal is one that links receiver storage, room ventilation, filtration and maintenance access to the oil and gas process instead of treating them as optional extras. The final 75 kW proposal for Lobito will show whether this is included, optional or dependent on site preparation.
| Sector | Likely compressed-air uses | Specification priority |
|---|---|---|
| Oil And Gas | maintenance, instrumentation support, valve control and workshop duties | air quality, documentation, safety review and reliable pressure |
| Steel | pneumatic equipment, cleaning, tooling and production support | measured demand, moisture control, service access and pressure stability |
| Steel | pneumatic equipment, cleaning, tooling and production support | measured demand, moisture control, service access and pressure stability |
Supply the compressor for connection to a suitable existing receiver, dryer and distribution system in Lobito. Existing equipment should be checked for capacity and pressure loss first. For the 75 kW Lobito proposal, this point is verified against the submitted site data before the final scope is issued.
Combine the 75 kW machine with a reviewed 3 000–5 000 L receiver range, refrigeration dryer, pre-filter, coalescing filter and automatic drains for the oil and gas duty. The final 75 kW proposal for Lobito will show whether this is included, optional or dependent on site preparation.
Allow connection points, controls and pipe capacity for future steel demand. Where air loss stops production, evaluate standby capacity or an emergency compressor connection. For the 75 kW Lobito proposal, this point is verified against the submitted site data before the final scope is issued.
Motor size alone does not confirm suitability. Compare usable flow at pressure, duty cycle and air quality for each option. In the Lobito quotation, this is matched to the actual operating pattern of the proposed 75 kW system.
List every air user that can run together, its required pressure and the operating hours. The 75 kW model is rated at about 13 m³/min at a typical 7 bar point, but the final choice must allow for pressure, leakage, dryer loss and sensible growth margin for the oil and gas duty. For the 75 kW Lobito proposal, this point is verified against the submitted site data before the final scope is issued.
Fixed-speed can suit a stable base load. VSD is normally considered when the oil and gas demand changes materially through the shift. A simple air-demand profile is the best way to compare energy use rather than choosing VSD automatically. This forms part of the technical review for the 75 kW Lobito quotation rather than being treated as a standard assumption.
3 000–5 000 L is a practical starting range, but the receiver must be checked against demand peaks, control method and available space. Short events linked to maintenance, instrumentation support, valve control and workshop duties may justify more storage instead of oversizing the compressor.
Most production systems benefit from a matched refrigeration dryer and filtration. The required dew point and filter grade depend on the oil and gas process; sensitive instruments or product-contact risks may require a different air-quality design. This is one of the checks used to distinguish the 75 kW Lobito package from a generic equipment-only quote.
A service plan for Lobito, Angola starts with hours, environment and the production consequence of the oil and gas process. For a 75 kW unit, address criticality, standby capacity, condition monitoring and major-service planning.
Oil, filters, separator, drive, cooling, drains and controls are scoped from the exact machine.
Alarms, pressure, temperature, current and behaviour help separate component, demand, ventilation and pipework faults in Lobito, Angola.
Planned visits, reporting, open actions and critical-spares planning can be aligned to the oil and gas duty.
Air treatment, drains, storage, leaks and point-of-use pressure can be included where they affect the problem.
Yes. Send the model, serial, hours, service history and exact Lobito, Angola site details so travel, parts and shutdown needs can be quoted.
Send the alarm, operating symptom, available pressure and temperature, nameplate and controller photos, site contact, access details and production impact in Lobito, Angola.
Coverage note: service availability, travel and response are confirmed for the exact site. This page describes coverage and does not represent a separate staffed branch in Lobito, Angola.
Send the air users, pressure, hours, electrical supply, existing equipment and delivery position. We will respond with a defined compressor, receiver, dryer, filtration and installation scope. For Lobito, the 75 kW recommendation records this item in the equipment and installation schedule.
Request a Detailed QuoteCall Sales