A 15 kW screw compressor is commonly shortlisted when a Tete operation needs dependable air for maintenance workshops, pneumatic controls, cleaning and plant-support duties, but final sizing still needs a measured demand check.
Typical planning role: a medium-duty production area with several simultaneous users. This is reviewed specifically for the 15 kW compressor in Tete application rather than carried over as a standard assumption.
For the type of coal mining and vale work associated with this Tete page, the design emphasis is dust control, filtration access, rugged installation and service readiness. Those items have a direct effect on reliability and operating cost. This is one of the checks used to distinguish the 15 kW Tete package from a generic equipment-only quote.
One realistic design case for this page is a mixed base load from coal mining equipment and short peaks from pneumatic equipment, cleaning, tooling and production support. The 15 kW unit supplies about 2.2 m³/min at a typical 7 bar reference point, but the decision must be checked at the site’s actual pressure and simultaneous demand.
For coal mining in Tete, list the equipment behind maintenance workshops, pneumatic controls, cleaning and plant-support duties and separate steady consumers from short peaks. This determines whether 15 kW is a base-load match or only one part of the final system.
The package should address dust control, filtration access, rugged installation and service readiness. A matched dryer and filter train must meet the most sensitive coal mining application without adding unnecessary pressure loss. For Tete, the 15 kW recommendation records this item in the equipment and installation schedule.
Where vale demand changes through the shift, VSD may reduce unloaded operation. Where demand is stable, fixed-speed can remain the better-value option. The choice should follow a demand profile, not a general rule. The final 15 kW proposal for Tete will show whether this is included, optional or dependent on site preparation.
The 15 kW design for Tete uses that local operating context to set storage, filtration, ventilation and maintenance requirements.
For this 15 kW page, the strongest proposal is one that links receiver storage, room ventilation, filtration and maintenance access to the coal mining process instead of treating them as optional extras.
| Sector | Likely compressed-air uses | Specification priority |
|---|---|---|
| Coal Mining | maintenance workshops, pneumatic controls, cleaning and plant-support duties | dust control, filtration access, rugged installation and service readiness |
| Vale | pneumatic equipment, cleaning, tooling and production support | measured demand, moisture control, service access and pressure stability |
| Mining Support | workshop tools, plant maintenance, pneumatic controls and cleaning | dust loading, ventilation, spares planning and resilience during maintenance |
Supply the compressor for connection to a suitable existing receiver, dryer and distribution system in Tete. Existing equipment should be checked for capacity and pressure loss first. Before order placement, this point is reviewed for the specific 15 kW installation in Tete.
Combine the 15 kW machine with a reviewed 500–1 000 L receiver range, refrigeration dryer, pre-filter, coalescing filter and automatic drains for the coal mining duty.
Allow connection points, controls and pipe capacity for future vale demand. Where air loss stops production, evaluate standby capacity or an emergency compressor connection. On the Tete project, we confirm this specifically for the 15 kW package and the measured duty profile.
Motor size alone does not confirm suitability. Compare usable flow at pressure, duty cycle and air quality for each option. This detail is confirmed during the 15 kW site-planning stage for Tete.
Include known equipment additions and a measured margin, but avoid buying excessive unused capacity. A larger receiver, leak reduction and a VSD/base-load combination may handle growth more efficiently than simply moving to the next motor size. The Tete system brief links this requirement to the control and air-treatment plan for the 15 kW machine.
Send the required pressure, list of air users, operating hours, electrical supply, existing receiver or dryer details, air-quality requirement and delivery address. Photos of the intended compressor position and current pipe connection also improve the accuracy of the proposal. The 15 kW design for Tete is checked against this requirement before compressor, receiver and dryer selections are finalised.
Start with the most sensitive point of use, then choose dryer performance and filter grades from that requirement. The design should also provide accessible condensate drains and avoid creating unnecessary pressure drop through over-restrictive filtration. On the Tete project, we confirm this specifically for the 15 kW package and the measured duty profile.
Yes. We can quote the equipment, delivery and agreed commissioning scope for Tete, with ongoing access to service parts, oils, filters and separator elements. Cross-border projects are quoted with the required logistics and documentation clearly defined. This is one of the checks used to distinguish the 15 kW Tete package from a generic equipment-only quote.
For equipment in Tete, Mozambique, first determine whether the need is routine maintenance, diagnosis, repair or overhaul. For a 15 kW unit, record temperature, pressure, current, separator condition and air treatment.
Oil, filters, separator, drive, cooling, drains and controls are scoped from the exact machine.
Alarms, pressure, temperature, current and behaviour help separate component, demand, ventilation and pipework faults in Tete, Mozambique.
Planned visits, reporting, open actions and critical-spares planning can be aligned to the coal mining duty.
Air treatment, drains, storage, leaks and point-of-use pressure can be included where they affect the problem.
Yes. Send the model, serial, hours, service history and exact Tete, Mozambique site details so travel, parts and shutdown needs can be quoted.
Send the alarm, operating symptom, available pressure and temperature, nameplate and controller photos, site contact, access details and production impact in Tete, Mozambique.
Coverage note: service availability, travel and response are confirmed for the exact site. This page describes coverage and does not represent a separate staffed branch in Tete, Mozambique.
Send the air users, pressure, hours, electrical supply, existing equipment and delivery position. We will respond with a defined compressor, receiver, dryer, filtration and installation scope. For the 15 kW Tete proposal, this point is verified against the submitted site data before the final scope is issued.
Request a Detailed QuoteCall Sales