For a logistics operation in Tete, a 22 kW screw compressor is best treated as a complete air-system decision rather than a stand-alone machine purchase.
Typical planning role: a continuous line with multiple pneumatic consumers.
For the type of logistics and moatize coal work associated with this Tete page, the design emphasis is fast recovery, practical pipe routing and dependable service access. Those items have a direct effect on reliability and operating cost. For the 22 kW Tete proposal, this point is verified against the submitted site data before the final scope is issued.
One realistic design case for this page is a moatize coal department with several users cycling through the shift. The 22 kW unit supplies about 3.6 m³/min at a typical 7 bar reference point, but the decision must be checked at the site’s actual pressure and simultaneous demand.
For logistics in Tete, list the equipment behind vehicle workshops, loading equipment, maintenance bays and packaging support and separate steady consumers from short peaks. This determines whether 22 kW is a base-load match or only one part of the final system.
The package should address fast recovery, practical pipe routing and dependable service access. A matched dryer and filter train must meet the most sensitive logistics application without adding unnecessary pressure loss. The 22 kW design for Tete is checked against this requirement before compressor, receiver and dryer selections are finalised.
Where moatize coal demand changes through the shift, VSD may reduce unloaded operation. Where demand is stable, fixed-speed can remain the better-value option. The choice should follow a demand profile, not a general rule.
For this 22 kW Tete brief, the same operating priorities are converted into practical equipment and installation choices.
For this 22 kW page, the strongest proposal is one that links receiver storage, room ventilation, filtration and maintenance access to the logistics process instead of treating them as optional extras. This is one of the checks used to distinguish the 22 kW Tete package from a generic equipment-only quote.
| Sector | Likely compressed-air uses | Specification priority |
|---|---|---|
| Logistics | vehicle workshops, loading equipment, maintenance bays and packaging support | fast recovery, practical pipe routing and dependable service access |
| Moatize Coal | pneumatic equipment, cleaning, tooling and production support | measured demand, moisture control, service access and pressure stability |
| Moatize Coal | pneumatic equipment, cleaning, tooling and production support | measured demand, moisture control, service access and pressure stability |
Supply the compressor for connection to a suitable existing receiver, dryer and distribution system in Tete. Existing equipment should be checked for capacity and pressure loss first. In the Tete quotation, this is matched to the actual operating pattern of the proposed 22 kW system.
Combine the 22 kW machine with a reviewed 1 000 L receiver range, refrigeration dryer, pre-filter, coalescing filter and automatic drains for the logistics duty. The final 22 kW proposal for Tete will show whether this is included, optional or dependent on site preparation.
Allow connection points, controls and pipe capacity for future moatize coal demand. Where air loss stops production, evaluate standby capacity or an emergency compressor connection.
Motor size alone does not confirm suitability. Compare usable flow at pressure, duty cycle and air quality for each option. The Tete system brief links this requirement to the control and air-treatment plan for the 22 kW machine.
Specify the minimum pressure required at the furthest user, then calculate losses through pipework, filters and the dryer. Raising the compressor set point to compensate for a restrictive network wastes energy, so the distribution system should be checked first. For Tete, the 22 kW recommendation records this item in the equipment and installation schedule.
The scope can include delivery, off-loading, positioning, receiver and dryer connections, airline tie-in, electrical coordination, commissioning and operator handover. The final quotation separates included work from any site preparation required before arrival. This detail is confirmed during the 22 kW site-planning stage for Tete.
Base the service plan on operating hours, environment and manufacturer intervals. For a mixed industrial, engineering and workshop environment, intake filters, cooler cleanliness, drains and ventilation deserve routine inspection in addition to oil, separator and filter changes. Before order placement, this point is reviewed for the specific 22 kW installation in Tete.
If loss of air stops the logistics process, compare the cost of downtime with a duty/standby arrangement or an emergency connection point. Redundancy can sometimes be phased in, but the pipework and controls should allow for it from the start. In the Tete quotation, this is matched to the actual operating pattern of the proposed 22 kW system.
For Tete, Mozambique, maintenance should reflect the logistics duty rather than a generic interval. For a 22 kW unit, operating trends and critical-spares planning become increasingly important.
Oil, filters, separator, drive, cooling, drains and controls are scoped from the exact machine.
Alarms, pressure, temperature, current and behaviour help separate component, demand, ventilation and pipework faults in Tete, Mozambique.
Planned visits, reporting, open actions and critical-spares planning can be aligned to the logistics duty.
Air treatment, drains, storage, leaks and point-of-use pressure can be included where they affect the problem.
Yes. Send the model, serial, hours, service history and exact Tete, Mozambique site details so travel, parts and shutdown needs can be quoted.
Send the alarm, operating symptom, available pressure and temperature, nameplate and controller photos, site contact, access details and production impact in Tete, Mozambique.
Coverage note: service availability, travel and response are confirmed for the exact site. This page describes coverage and does not represent a separate staffed branch in Tete, Mozambique.
Send the air users, pressure, hours, electrical supply, existing equipment and delivery position. We will respond with a defined compressor, receiver, dryer, filtration and installation scope. On the Tete project, we confirm this specifically for the 22 kW package and the measured duty profile.
Request a Detailed QuoteCall Sales